What killed it, well after reviewing some PS4 gameplay I noticed that it was having audio issues, like it would allow some sounds but not all. It was almost as if it was receiving a 5.1 audio output but was missing the centre channel. Even though the PS4 was set to stereo.

After trying various cables, configs, and boxes. I narrowed it down to this box. Not sure what killed it, whether it’s just old, or that it’s been powered on for over 5 years straight. But its long service will never be forgotten in the hours of Netflix and Disney Plus it passed through to my recorder.

  • db2@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    30
    arrow-down
    2
    ·
    1 year ago

    I see corrosion/deposits by those two leds and the hdmi… rinse it with vinegar, then DI water, then 90% alcohol. See if that doesn’t bring it back to life once it’s fully dry. You also might have to reflow the solder though.

    • the16bitgamer@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      12
      ·
      1 year ago

      I have another in the setup thats working, but I’ll probably hold onto it though if I can fix it as easily as you say

    • circuscritic@lemmy.ca
      link
      fedilink
      English
      arrow-up
      8
      ·
      1 year ago

      This.

      I would absolutely try cleaning the board.

      I would also spend $8-20 for a new one before I tried to DIY solder reflow various SMD caps.

    • foofiepie@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      How would you reflow the solder?

      With an iron? Or a heat gun? What would be the best approach for something like this with lots of tiny surface mounts?

      • Uranium 🟩@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        8
        ·
        edit-2
        1 year ago

        Not who you asked but 100% use a narrow heat gun, no question; it saves so much time alongside not accidentally bringing connectors

          • Uranium 🟩@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            They can work, though I’m always reluctant to suggest using them, unless you have one that you can spare without worry of ruining the oven (offgassing from components/PCB/flux), the other problem is ovens can be a lot more variable in temperature than you’d think, and in this scenario where it may even be the chips showing their age, subjecting them to very high temperatures isn’t recommended.

            Honestly when I bought a small £20 heatgun (smaller than the type you’d use to strip paint), I was kicking myself for not having bought one sooner, they make surface mounted components an absolute breeze Vs using a soldering iron.

            The one exception for using ovens is if you’re having to do an intricate board with hundreds of components, then I’d suggest buying a small/medium toaster over, and an oven thermometer for more accurate readings.

      • agent_flounder@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        1
        ·
        1 year ago

        If you have a hot air rework station, that’s one way. Because then it is temp and flow controlled and you can choose a suitable nozzle and direct heat to small spots.

    • MrZee@lemm.ee
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Just curious since you clearly know a lot about this stuff: What are your thoughts on the heat sinks being a part of the issue? Is there a decent chance the device could benefit from replacing whatever adhesive/paste was used to attach them? Or is that even doable?

      • db2@sopuli.xyz
        link
        fedilink
        English
        arrow-up
        6
        ·
        1 year ago

        It depends on how much heat it’s actually making, but maybe if the factory job done was crappy. It’s probably thermal adhesive though which is harder to remove.

    • Pretzilla@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Good call. And better than 90% isopropyl is Anhydrous alcohol.

      A neighborhood laptop repair shop could probably do all these steps for you, too.